This years model in stock now for immediate despatch.  

NEW DESIGN FOR 2013 - Now you can enjoy a relaxing spa without the need for a costly or permanent installation. The Lay-Z-Spa is manufactured by Bestway and is completely portable taking just 10 minutes to assemble. (Filling and heating of water takes longer)

The Bestway Lay-Z-Spa is a fully portable spa, no need for permanent installation throughout the year. Just empty the water out and fit it back in its box. Most garden spa cost in the region of £4,000, this one can be up and running in your garden for less than quarter of that price! Be the envy of your neighbours.

Once assembled the Lay z Spa automated control system will circulate the water, heat it up to 40°C and force it through the 80 turbo micro air jets. The combined heater and pump unit has a digital display and simply plugs into a normal household 240V socket. This Lay-z-spa not only circulates and heats the water but also cycles the water through the built in filtration system. The pump unit is also used to inflate the pool itself saving time and effort. The pool also comes complete with a soft locking cover which insulates the water as well as keeping unwanted debris from the spa when not in use.

Specifications of the Bestway Lay-Z-Spa 

• Inflated Dimensions: 196cm x 61cm (77" x 24") 
• Water capacity (80%) 848 litres (224gal)
• Capacity 4 adults
• Water filtration system: 1325l/h (350gal/h)
• Heating 1.5-2° C/h (3-4° F/h). Max heat capacity 40° C (104° F).
• 80 massage air jets
• Rapid heating system
• Water filtration system
• Cover included
• Inflates using Spa's pump.
• Heavy duty repair patch included
• Comes with a free DVD detailing pool set-up and maintenance. CE approved.
• Includes filter cartridge (58094) and chemical floater
• Quick heating system using digitally controlled 2KW heater.
• Multilayered circuit protection
• Digital control panel
• CE approved
• Temperature control adjustable to up to 104 degrees Fahrenheit.
• Typical heat up time is 1 Celcius per hour
• Locking safety cover
• Nylon outer cover
• Air filled cushioned base with PVC interior

For the safety of all users we recommend that correct sanitisation procedures are followed using one of the following chemicals, kits can be added by using the drop downs above.

There are two types of sanitisers you can use in a spa:

Bromine
Bromine is the most widely used sanitiser for hot tubs and spas as it is less volatile at the high temperatures which spas operate and does not form smelly by products. Bromine is normally supplied as white tablets, bromo-chloro-dimethyl hydantoin (BCDMH), which are placed in a floating dispenser. BCDMH should not be added directly to the spa or through a skimmer. The dispenser is adjusted to give a bromine level between 3 and 6 pm.

Stabilised Chlorine
Stabilised Chlorine can be used in spas in the same way as pools. In order to stop chlorine being broken down by sunlight it is combined with a stabiliser. The stabiliser is cyanuric acid. Cyanuric acid can be added separately or more commonly it is supplied as stabilised chlorine granules or tablets. The problem with all stabilised chlorine products is that as well as stopping the sunlight breaking down the chlorine they also make the chlorine less effective. Therefore it is important not to get too much cyanuric acid in the water. This is unlikely to be a problem in a domestic spa or hot tub which should be drained every month.